Apply Sunforgettable^® Total Protection^™ Face Shield SPF 50 15 minutes before exposure to environmental aggressors. Like all SPF products, reapply every 2 hours. For convenient all-day reapplication on-the-go or directly over makeup, use the Total Protection^™ Brush-on Shield SPF 50.

If applied once daily as recommended, Sunforgettable^® Total Protection^™ Face Shield SPF 50 will last approximately 90 days.

Total Protection^™ Face Shield SPF 50 is 100% mineral environmental protection that is free of chemical active ingredients, oil free, hypoallergenic, non-comedogenic and suitable for all skin types. If you have known allergies or specific ingredient sensitivities, we always recommend consulting your skin health professional before introducing a new product.

Sunforgettable^® Total Protection^™ Face Shield Matte SPF 50 has a universal shade due to the coloring of iron oxides. However, when it is applied on the skin, the formula allows for sheer application with no white residue unlike other mineral sunscreen care products.

Yes, Sunforgettable^® Total Protection^™ Face Shield SPF 50 has a universal shade that is suitable for all skin tones. It dries clear and leaves no white residue on the skin.

To achieve color coverage with the Sunforgettable® Total Protection™ Face Shield Matte SPF 50, we have a variety of options.
For color coverage in powder format, apply Face Shield Matte, then follow with our Natural Finish Pressed Foundation SPF 20 in a shade of your choice.
For color coverage in liquid format, Matte can be layered under Face Shield Flex for medium to buildable color coverage.
Apply Matte first and allow 1 minute to set. Then follow with your preferred shade of Face Shield Flex.

As with all SPF products, Sunforgettable^® Total Protection^™ Face Shield SPF 50 should be applied 15 minutes prior to exposure. Like all SPF products, reapply every 2 hours. For convenient reapplication on-the-go or directly over makeup, Use the Total Protection^™ Brush-on Shield SPF 50 brush for all-day, on-the-go reapplication every 2 hours.

We recommend a nickel-sized amount for the face and more as needed for neck and décollaté.

Apply Sunforgettable^® Total Protection^™ Face Shield SPF 50 for your initial application. Like all SPF products, reapply every 2 hours. For convenient all-day reapplication on-the-go or directly over makeup, use the Total Protection^™ Brush-on Shield SPF 50.

No, Sunforgettable® Total Protection™ Face Shield Matte SPF 50 does not list an expiration date. This is because the FDA has established requirements for all over-the-counter drug products (sunscreens) to go through stability testing to assure products are stable and have appropriate expiry dating. All products with less than 3 years real time stability testing must include an expiry date on their packaging per federal regulations. After the product passes 3-year real time stability testing, an expiry date is no longer required, as the testing supports stability for at least 3 years.

Once a product passes the testing after the 3-year period, an expiration date is no longer printed on subsequent production of this product. This product has completed the 3-year FDA stability testing and is no longer required to have an expiration date as the product is found to be extremely stable.

We recommend using the product within the indicated PAO (period-after-opening) timeframe once the product is opened and activated.

You can always find the PAO information by looking at the open jar icon that can be found on your product. On most products, you will find the PAO is 12 months. This timeframe is a recommended guideline for using the product at its peak efficacy.

Yes, Sunforgettable^® Total Protection^™ Face Shield SPF 50 is water/sweat resistant for up to 40 minutes.

Total Protection^™ Face Shield SPF 50 is 100% mineral environmental protection that is free of chemical active ingredients, oil free, hypoallergenic, non-comedogenic and suitable for all skin types. If you have known allergies or specific ingredient sensitivities, we always recommend consulting your skin health professional before introducing a new product.

Sunforgettable^® Total Protection^™ Face Shield SPF 50 is designed to be the first step in your makeup routine. We recommend applying after moisturizer and following with your favorite Colorescience^® foundation or enhancements, and using the Sunforgettable^® Total Protection^™ Brush-on Shield SPF 50 for all-day reapplication.

If you would like to use it with a perfector or treatment, apply Sunforgettable^® Total Protection^™ Face Shield SPF 50 first and follow with your selected perfector or treatment.

Yes, if you would like to use Sunforgettable® Total Protection™ Face Shield Flex SPF 50 with one of our Primers SPF 20, apply the primer first.

Mattifying Primer SPF 20 was designed to prep and prime oily skin for application of makeup and extend makeup wear. It's SPF 20 defense is meant to provide one layer of UV defense in one's makeup routine where additional products and SPF are applied. It is a non-comedogenic, 40minute water resistant primer designed with salicylic acid to control shine and blur imperfection of oily or blemish-prone skin.
Sunforgettable® Total Protection™ Face Shield Matte SPF 50 is a lightweight lotion texture designed primarily to provide comprehensive environmental protection from UVA/UVB pollution, blue light and IR. It contains silica-treated powders that help to absorb excess surface oil while providing powerful environmental defense in a single application. If you would like to apply together, apply Sunforgettable® Total Protection™ Face Shield Matte SPF 50 first and follow with your Mattifying Primer SPF 20.

Yes, you will find that all Face Shields offer so much versatility for use in your skincare and makeup regimens, including mixing, layering, or using on select areas of the face. To use Face Shield Matte SPF 50 with treatments, apply Even Up® Clinical Pigment Perfector® or All Calm® Clinical Redness Corrector first. This ensures you are getting the full application of the treatment product. Allow approximately 1 minute to dry. Then apply Face Shield Matte SPF 50.

UVB exposure causes redness or burning, while UVA exposure causes skin darkening/pigmentation. Protection from both UVA and UVB means this product provides Broad Spectrum protection. Total Protection^™ Face Shield SPF 50 provides Broad Spectrum SPF 50 (UVB protection) and PA++++ (UVA protection).

EnviroScreen^® Technology is proprietary to Colorescience^®. EnviroScreen^® Technology uses patented active ingredients, Zinc Oxide and Titanium Dioxide, that create a barrier preventing free radical formation and oxidative stress. These patented actives are combined with specialty ingredients that, together, work synergistically to protect skin from damage caused by exposure to UVA/UVB rays, pollution, blue light (also known as High Energy Visible, or HEV, light), and infrared radiation.

Colorescience^® follows the FDA guidelines for testing water resistance or adherence to the skin after exposure to water. A panel of 10 people apply the product to their skin prior to being immersed in a whirlpool (of moving or circulating water) for 20-minute cycles. After 20 minutes in the whirlpool, panelists exit the whirlpool before immersing themselves again. For 40 minutes water resistance, panelists are immersed in the water for two 20-minute cycles. For 80 minutes water resistance, this is done a total of 4 times. After all cycles are completed, the SPF that is remaining on the skin is measured. If after 80 minutes in the whirlpool, the SPF remaining is at least 50, the result is an SPF 50 with 80 minutes of water resistance.

We measure our pollution protection by directly measuring free radicals created from UV + pollution events on unprotected skin and skin protected with Sunforgettable^® Total Protection^™ Face Shield SPF 50. We use a testing technique called electron spin resonance (ESR) that uses a combination of a magnetic field and electron magnetic waves to directly detect the unpaired electrons of free radicals.

Blue (HEV) light protection is tested by measuring the ability of the formula to block light in the HEV spectrum that would otherwise reach the skin. In practice, this is done by applying the formula to a transparent substrate at the same dose level (2mg/cm2) used in the FDA Monograph SPF test. The substrate is then placed at the entrance of an integrating sphere detector which captures all the light passing through the sample. This configuration is the same as that used in the FDA Monograph Critical Wavelength measurement and mimics the situation of a formula applied to the skin. The percentage of HEV light blocked is calculated by comparing the intensity of the light transmitted through the formula to the incident light at each wavelength throughout the HEV spectrum (400–490 nm).

Although Sunforgettable^® Total Protection^™ Face Shield SPF 50 was formulated with ingredients that help to hydrate and nourish, it is best applied to moisturized skin, particularly for those who have dry or fragile skin.

While Sunforgettable^® Total Protection^™ Face Shield SPF 50 can be applied to the body, its specialty ingredients and lightweight texture make it ideal for applying to face, neck, and décolleté.

No. Our perfectors were formulated to treat specific skin concerns to mattify, bronze, brighten, or calm, while our treatments were designed to treat such skin conditions as hyperpigmentation and redness. Sunforgettable^® Total Protection^™ Face Shield SPF 50 is designed for all skin types and is ideal for those without a particular skin condition seeking protection from UVA/UVB, pollution, blue light and IR. Its invisible and weightless finish also makes this an ideal product for men. If you would like to use it with a perfector or treatment, apply Sunforgettable^® Total Protection^™ Face Shield SPF 50 first and follow with your selected perfector or treatment.

No, unlike other mineral SPF products, Sunforgettable^® Total Protection^™ Face Shield SPF 50 was formulated with proprietary EnviroScreen^™ Technology using patented zinc oxide. In addition, iron oxides result in a universal shade, leaving no white cast for all skin tones.

There are no animal products or derivatives in the following Total Protection™ product: Brush-On Shield SPF 50, Brush-On Shield Glow SPF 50, Brush-On Shield Bronze SPF 50, Sheer Matte SPF 30 Sunscreen Brush, all shades of Face Shield SPF 50, all shades of Body Shield SPF 50, Sport Stick SPF 50, blush, bronze, and golden hour Color Balms. The berry, pink sky, and violet haze Color Balms contain carmine. All Colorescience® products are 100% free from parabens, phthalates, synthetic fragrance, animal testing, talc, dyes, mineral oils, drying alcohols & chemical sunscreen.

Yes, this product is sold in the EU and meets EU requirements for sunscreens.

Yes, apply your moisturizer or moisturizing oil first, and then layer Face Shield over the top. When we mix non-SPF products in with SPF containing products, it dilutes their SPF efficacy.  While it can vary from product to product with regard to how much reduction occurs, it is best practice is to layer them as opposed to mixing.

All Total Protection^® products use only all-mineral zinc oxide and/or titanium dioxide which are the only sunscreen active ingredients recognized as safe and effective by the FDA.

Per FDA recommendation as well, our Total Protection^® products are safe to apply to children 6 months and older. For use on children under 6 months of age, please consult your physician.

While all Total Protection^® products are hypoallergenic and safe for sensitive skin and children above 6 months, young children and babies have especially delicate skin which is why we recommend the below, our most soothing all-mineral formulas, to protect their skin.

• Total Protection® No-Show™ Mineral Sunscreen SPF 50
• Sunforgettable® Total Protection® Sheer Matte SPF 30 Sunscreen Brush 
• Sunforgettable® Total Protection® Body Shield Classic SPF 50

For teens and young adults, our Total Protection® Face Shield SPF 50 collection is a fan favorite for all-mineral, tinted formulas that can be mixed and matched to customize your protection. Please note, however, that all Total Protection^® Face Shield SPF 50 formulas contain 2% niacinamide. While niacinamide, also known as Vitamin B3, is known to help soothe skin, aid the skin barrier, and balance sebum production, it can lead to irritation for those with an allergy. For this reason, we recommend a patch test on a small area of skin before applying directly to the face.

Total Protection™ products have not been tested on pregnant or nursing women. Consult your physician before using.

Yes, Colorescience uses only mineral (also known as physical) sunscreen active ingredients, zinc oxide and/or titanium dioxide in all of our sunscreen products. These are the only 2 sunscreen actives the FDA recognizes as safe and effective. Colorescience has never and will never use any chemical sunscreen actives.

The micas that Colorescience uses are ethically sourced. They are sourced from various parts of the world, including Japan, U.S. Mica is not a derivative of asbestos. Our mica vendors adhere to global regulations pertaining to the quality and safety of cosmetic ingredients. The mica used in Colorescience products is mined and processed to meet consistent standards of high quality, safety and aesthetics. Our mica passes or exceeds the standards for heavy metal and microbial testing.

Total Protection^™ Face Shields have not been tested for use around the eye area. Use caution when applying to the eye area and avoid getting product into eyes. Consider some of our non-liquid Total Protection^™ products, including Brush-On Shield SPF 50, Sport Stick SPF 50 and Color Balms SPF 50 in 6 shades.  Color Balms have been ophthalmology tested and are safe for use around the eye area, for sensitive eyes, and contact lens wearers.